BASIX Smart Pump | Aussie Water Savers

BASIX Smart Pump



Liquid Type: Clean Water
Clean water temperature range: 2 – 40 degrees

Pump body: Stainless Steel 304,
Jet/Venturi, Diffuser, Impeller: Noryl Glass Reinforced
Mechanical seal: Carbon/Ceramic/Nitrile
O rings: Nitrile
Power Cable: 1.5m Cable H05 3G1.0
Valves: Brass with stainless steel braided lines
Maximum ambient temperature: 40 degrees
Maximum operating pressure: 6 bar
Pipe connections suction/discharge: 1” BSPF / 1” BSPM

Electrical data:
Rated voltage: 220 (-6%) -240V (+6%)
Mains frequency: 50 Hz
P2 (kW): 0.9 (Shaft Power)
Current: 6 amps
Capacitor: 25 uF
Motor duty: Continuous
Motor type: Asynchronous, TEFC
Motor protection: In-built thermal overload
Ingress protection: IP X4
Insulation class: F
Net weight: 16 kg
Hydraulic Data:
Max Head: 46m
Max Flow: 40 l/min
Number taps: 6

Basalt GreyBeigeBirch GreyBlackBluestoneClay BrownDark GreenGull GreyHeritage RedMerino BeigeMist GreenMountain BlueSlate GreySmooth CreamStoneTank White
SKU: N/A Category:


Aussie Water Savers tank systems are best used with our BASIX smart pump. The Smart Pump system is best suited for granny flats, new homes, townhouse and duplex developments. Capable of pumping up to 3 storeys and 6 points within the dwelling, the pump also is solar power compatible. The best part about this pump system is the WaterMark approval. Available in colour choice to match any Colorbond colour, the pump is pre-assembled and uses only one 240 volt standard plug.

Additional information

Weight N/A
Dimensions N/A

Basalt Grey, Beige, Birch Grey, Black, Bluestone, Clay Brown, Dark Green, Gull Grey, Heritage Red, Merino Beige, Mist Green, Mountain Blue, Slate Grey, Smooth Cream, Stone, Tank White


There are no reviews yet.

Be the first to review “BASIX Smart Pump”

Your email address will not be published. Required fields are marked *